mosaic-go H (heading) evaluation kit

Dedicated GNSS heading module receiver

  • Dual antenna support for reliable and accurate sub-degree heading & pitch or heading & roll angles
  • Small evaluation kit: 74 x 59 x 11.5 mm
  • Weight: 62 g
  • Complete multi-frequency, multi-constellation GNSS receiver: GPS, GLONASS, Galileo, BeiDou, QZSS
  • Precise and reliable heading combined with centimeter-level RTK positioning.
  • Best-in-class anti-jamming, anti-spoofing tech.: Advanced Interference Mitigation and Monitoring (AIM+)
  • Ready to use interface with USB, serial ports, PPS and events
  • Industry leading ultra-low power consumption
  • High update rate: up to 100 Hz for measurements and 20 Hz for RTK + attitude
  • Comes with set of cables and intuitive web UI for easy operation and monitoring from any mobile device or computer

The mosaic-go H (heading) evaluation kit contains:

  • 1 mosaic-H module soldered on an interface board inside a metallic housing.
  • 1 USB-C cable
  • 6-pin COM1 open-ended cable
  • Quick start guide 

The evaluation kit offers the possibility to discover and test the mosaic-go heading module. Create a prototype by integrating the mosaic-go heading evaluation kit into your system using any of the of following connections: COM ports, USB 2.0, SD memory card.

         mosaic-go H receiver module evaluation kit
mosaic-go H receiver module evaluation kit

 

 

Buy your mosaic-go H evaluation kit 

Buy now

GNSS+ Technologies - Top performance in challenging environments:

advanced GNSS+ algorithms from Septentrio

Septentrio has been perfecting its GNSS+ algorithms for the past 25 years. Protect your GNSS receiver from:

  • heavy vibration with LOCK+ 
  • multipath with APME+ 
  • monitor your GNSS receiver's integity with RAIM+
  • ionospheric scintillation with IONO+
  • GNSS interference such as jamming and spoofing with AIM+

And get most out of your GNSS receiver even in challenging environments.

Septentrio LOCK+ protect your GPS receiver against vibrations

Mechanical vibrations or shocks caused by rough terrain can wreak havoc with satellite tracking. LOCK+ automatically adjusts the parameters of this receiver so you never lose position.

APME+ protect your GPS receiver agains GNSS signals' multipath

Metal and large nearby structures can reflect GNSS signals and produce multipath. The APME+ system effectively disentangles direct and reflected GNSS signals enhancing both position and measurement quality. APME+ is bias free and, in line with Septentrio’s commitment to maximum configurability, can be disabled.

RAIM+ monitor your GNSS receiver's integity

RAIM+ or Advanced Receiver Autonomous Integrity Monitoring comprises fault detection mechanisms of the receiver at all the levels including the generation of measurements, quality control and navigation algorithms. Detected faulty measurements, which are typically caused by high multipath or active ionosphere, are removed from the solution.

IONO+ advanced ionospheric scintillation monitoring and mitigation

Activity in the ionosphere is a problem for GNSS signals, from loss of RTK fix to total loss of signal lock. Having honed our skills, supporting applications in the most iono-active areas on Earth,  the result is IONO+: the most advanced protection against ionospheric disturbances to GNSS signals on any receiver.

AIM+ advanced anti GPS jamming and GPS spoofing monitoring and mitigation

The mosaic-go heading offers AIM+ Advanced Protection, an industry-leading technology with GNSS & GPS jamming and spoofing detection as well as automatic GNSS & GPS interference mitigation.

Easy-to-Integrate with an intuitive web app 

The mosaic-go H (heading) GPS/GNSS receiver module evaluation kit comes with fully documented interfaces, commands and data messages. The included GNSS receiver control and analysis software RxTools allows receiver configuration, monitoring as well as data logging and analysis. 

The receiver includes an intuitive web user interface for easy operation and monitoring allowing you to control the receiver from any mobile device or computer. The web interface also uses easy-to-read quality indicators ideal to monitor the receiver operation during the job at hand.

Septentrio-mosaic-X5-GNSS-Module-Receiver-WebUI
Illustrative image for Septentrio mosaic-H GNSS Module Receiver Web User Interface (WebUI)
         mosaic-go H receiver module evaluation kit
mosaic-go H receiver module evaluation kit

 

 

Buy mosaic-go H evaluation kit 

Buy now

GNSS technology

GPS: L1C/A, L2P, L2C
GLONASS: L1C/A, L2C/A
BeiDou: B1I, B2I, B3I
Galileo: E1, E5b
QZSS: L1C/A, L1C/B, L2C
NavIC: L5
L-band
GNSS heading

Septentrio patented GNSS+ technologies

IONO+ Advanced Ionosperic Scintillation Mitigation
More info
RAIM+ Receiver Autonomous Integrity Monitoring
More info

GNSS attitude accuracy

Heading - Antenna separation 1m
0.15 degrees
Pitch/Roll - Antenna separation 1m
0.25 degrees
Heading - Antenna separation 5m
0.03 degrees
Pitch/Roll - Antenna separation 5m
0.05 degrees

Get the product datasheet for more information

Support documentation

 

Product Change Notification 30 August 2022 - mosaic rev. 5
212.84 KB
Download
Support notification - Upgrade recommendation to latest version of mosaic firmware
181.13 KB
Download
mosaic Hardware Manual v1.11.0
4.28 MB
Download

Log in below and download our product resources

By filling in this form, you agree to the processing of your personal data by Septentrio in accordance with our privacy policy for the purpose of providing you with the requested information and keeping you informed via e-mail of relevant webinars, invitations to events and exhibitions, the latest product technology and insight articles about the GPS/GNSS industry and technology. If you change your mind, you can unsubscribe at any time.

Applications