mosaic-go CLAS evaluation kit

GNSS module with PPP-RTK corrections for Japan

  • Small size, big performance
  • Size: 74 x 59 x 11.5 mm
  • Weight: 62 g
  • Multi-constellation, multi-frequency including L6 CLAS support
  • Best-in-class RTK performance
  • OSNMA Support
  • AIM+ unique interference monitoring and mitigation system + advanced other GNSS+ algorithms
  • Industry-leading ultra-low power consumption
  • Easy-to-integrate
  • Japan's Centimeter Level Augmentation Service (CLAS) integrated

The mosaic-go CLAS evaluation kit contains:

  • 1 mosaic-H module soldered on an interface board inside a metallic housing.
  • 1 USB-C cable
  • 6-pin COM1 open-ended cable
  • Quick start guide 

The evaluation kit offers the possibility to discover and test the mosaic-go heading module. Create a prototype by integrating the mosaic-go heading evaluation kit into your system using any of the of following connections: COM ports, USB 2.0, SD memory card.


The Septentrio mosaic-go CLAS is a multi-constellation GNSS receiver evaluation kit packaged in a low-power surface mount module. With a wide array of interfaces, mosaic-go CLAS has been specifically designed for the needs of mass market applications like robotics and autonomous systems. This highly reliable, multi-frequency module supports the dedicated L6 signal enabling convenient plug-and-play sub-decimeter accuracy thanks to the integrated PPP-RTK correction service: Centimeter Level Augmentation Service (CLAS) provided by Japan’s Quasi-Zenith Satellite System (QZSS, aka Michibiki). 

mosaic-go_CLAS_evaluation_GPS_GNSS_receiver_module_receiver

 

Buy your mosaic-go CLAS evaluation kit today

Buy now

 

 

GNSS+ Technologies - Top performance in challenging environments:

advanced GNSS+ algorithms from Septentrio

Septentrio has been perfecting its GNSS+ algorithms for the past 25 years. Protect your GNSS receiver from:

  • heavy vibration with LOCK+ 
  • multipath with APME+ 
  • monitor your GNSS receiver's integity with RAIM+
  • ionospheric scintillation with IONO+
  • GNSS interference such as jamming and spoofing with AIM+

And get most out of your GNSS receiver even in challenging environments.

Septentrio LOCK+ protect your GPS receiver against vibrations

Mechanical vibrations or shocks caused by rough terrain can wreak havoc with satellite tracking. LOCK+ automatically adjusts the parameters of this receiver so you never lose position.

APME+ protect your GPS receiver agains GNSS signals' multipath

Metal and large nearby structures can reflect GNSS signals and produce multipath. The APME+ system effectively disentangles direct and reflected GNSS signals enhancing both position and measurement quality. APME+ is bias free and, in line with Septentrio’s commitment to maximum configurability, can be disabled.

RAIM+ monitor your GNSS receiver's integity

RAIM+ or Advanced Receiver Autonomous Integrity Monitoring comprises fault detection mechanisms of the receiver at all the levels including the generation of measurements, quality control and navigation algorithms. Detected faulty measurements, which are typically caused by high multipath or active ionosphere, are removed from the solution.

IONO+ advanced ionospheric scintillation monitoring and mitigation

Activity in the ionosphere is a problem for GNSS signals, from loss of RTK fix to total loss of signal lock. Having honed our skills, supporting applications in the most iono-active areas on Earth,  the result is IONO+: the most advanced protection against ionospheric disturbances to GNSS signals on any receiver.

AIM+ advanced anti GPS jamming and GPS spoofing monitoring and mitigation

The mosaic-go CLAS evaluation kit offers AIM+ Premium : industry-leading technology with GNSS & GPS jamming and spoofing detection as well as automatic GNSS & GPS interference mitigation.

Ultra-low power design

mosaic-go CLAS provides RTK positioning at the lowest power consumption of any comparable device on the market.

Easy-to-integrate

mosaic-go CLAS comes with fully-documented interfaces, commands and data messages. The included RxTools software allows receiver configuration, monitoring as well as data logging and analysis.

Intuitive web user interface

The mosaic-go CLAS includes an intuitive web user interface for easy operation and monitoring allowing you to control the receiver from any mobile device or computer. The web interface also uses easy-to-read quality indicators ideal to monitor the receiver operation during the job at hand.

Septentrio-mosaic-X5-T-CLAS-GNSS-Module-Receiver-WebUI
Illustrative image for Septentrio mosaic-CLAS GNSS Receiver Web User Interface (WebUI)

GNSS technology

Hardware channels
More info

For simultaneous tracking of visible satellite signals. Depending on configuration.

More info
448
GPS: L1C/A, L2P
GLONASS: L1CA, L2CA
BeiDou: B1I, B2I, B3I
Galileo: E1, E5b
QZSS: L1C/A, L1C/B, L2C, L6
5 constellation RTK (base and rover)

Septentrio patented GNSS+ technologies

APME+ Advanced Multipath Mitigation
More info

APME+

A posteriori multipath estimator for code and phase multipath mitigation. All multipath mitigation and smoothing algorithms can enabled/disabled.

More info
LOCK+ Superior tracking robustness under heavy mechanical shocks or vibrations
More info
IONO+ Advanced Ionosperic Scintillation Mitigation
More info
RAIM+ Receiver Autonomous Integrity Monitoring
More info

Product datasheet

Support documentation

Product Change Notification 30 August 2022 - mosaic rev. 5
212.84 KB
Download
mosaic Hardware Manual v1.11.0
4.28 MB
Download

Log in below and download our product resources

By filling in this form, you agree to the processing of your personal data by Septentrio in accordance with our privacy policy for the purpose of providing you with the requested information and keeping you informed via e-mail of relevant webinars, invitations to events and exhibitions, the latest product technology and insight articles about the GPS/GNSS industry and technology. If you change your mind, you can unsubscribe at any time.

Applications