mosaic-go G5 P3H evaluation kit

Enabling simple evaluation of mosaic-G5 P3H GNSS heading module receiver

  • All-in-view multi-frequency, multi-constellation GNSS receiver: GPS, GLONASS, Galileo, BeiDou, QZSS
  • Tri-band GNSS heading in dual antenna configuration
  • Small evaluation kit: 74 x 44 x 11.4 mm, weight: 50g
  • Ready to use interface with USB-C, UART, PPS and SD card slot
  • Direct connection to popular autopilots
  • Industry leading ultra-low power consumption
  • Easy evaluation of rover functionality 

  • Best-in-class RTK centimeter-level positioning

  • Direct connection to popular open-source autopilots

Note: this product is commercially available from Fall 2025 onwards - please contact us for urgent requests.

The mosaic-go G5 P3H evaluation kit contains:

  • 1 mosaic-G5 P3H GNSS/GPS module soldered on an interface board inside a metallic housing.
  • 1 USB cable
  • 6-pin COM1 open-ended cable

The mosaic-go G5 P3H is Septentrio's most compact high-precision GPS/GNSS evaluation kit, delivering best-in-class centimeter-level positioning performance especially in challenging environments. It is designed for easy evaluation of mosaic-G5 P3H. This unique high-performance module supports all current GNSS satellite signals and is future-proof for upcoming signals and services. 

Create a prototype by integrating the mosaic-go evaluation kit into your system using any of the of following connections: UART ports, USB 2.0, SD memory card.

See mosaic-G5 P3H product page for the full details about this GNSS receiver. 

Ultra-low power design

The mosaic-go G5 P3 provides RTK positioning at the lowest power consumption of any comparable device on the market.

GNSS heading receiver

The mosaic-go G5 P3H provides quad-band positioning in single antenna mode. In dual antenna mode it provides triple-band positioning in addition to sub-degree heading and pitch or heading and roll angles. 

GPS/GNSS receiver with direct connection to UAV autopilots

Use the 6-pin JST-GH UART to connect directly to pupular open-source autopilots for efficient integration into drones. 

Easy-to-integrate

The mosaic-go G5 P3 comes with fully-documented interfaces, commands and data messages. The included RxTools software allows receiver configuration, monitoring as well as data logging and analysis.

 

Buy your mosaic-go G5 P3 evaluation development kit today

Buy now

GNSS technology

Hardware channels
More info

For simultaneous tracking of visible satellite signals. Depending on configuration.

More info
789
GPS: L1C/A, L1PY, L2C, L2P(Y), L5
GLONASS: L1CA, L2CA, L2P, L3 CDMA
Beidou: B1I, B1C, B2a, B2I, B2b, B3I
Galileo: E1, E5a, E5b, E6
QZSS: L1C/A, L1C/B, L2C, L5, L6
NavIC: L5
L-band
5 constellation RTK (base and rover)
GNSS heading

Septentrio patented GNSS+ technologies

AIM+ anti-jamming, anti-spoofing Advanced Interference Monitoring and Mitigation
More info

AIM+

Unique anti-interference system monitors, flags and mitigates narrowband interference, jamming and spoofing.

More info

Interfaces

Ethernet (RMII/MDIO), 10/100 Mbps
USB device (2.0, HS)
1
Event markers
More info

Depending on configuration.

2
Initialisation time
7 s

Other positioning modes accuracy

Horizontal standalone
More info

Open sky conditions. RMS levels.

1.2 m
Vertical standalone
1.9 m
Horizontal SBAS
0.6 m
Vertical SBAS
0.8 m
Horizontal DGNSS
0.4 m
Vertical DGNSS
0.7 m

Learn more

Support documentation

mosaic-G5 Hardware Manual v1.1.0
2.54 MB
Download

Log in below and download our product resources

By filling in this form, you agree to the processing of your personal data by Septentrio in accordance with our privacy policy for the purpose of providing you with the requested information and keeping you informed via e-mail of relevant webinars, invitations to events and exhibitions, the latest product technology and insight articles about the GPS/GNSS industry and technology. If you change your mind, you can unsubscribe at any time.

Applications