AsteRx-i3 D Pro+

GNSS/INS including sensor fusion in single and dual antenna for integrated solutions

  • Reliable and accurate IMU-enhanced GNSS positioning down to the centimeter level
  • Full access to raw GNSS and IMU data
  • Single or dual GNSS antenna with heading, pitch and roll
  • Lightweight, low power and compact
  • AIM+anti-jamming, anti-spoofing technology as part of the advanced GNSS+ algorithms 
  • Quad-constellation, multi-frequency, all-in-view RTK positioning
  • Fast and easy integration with the intuitive Web Interface, automatic lever arm optimization and support Knowledge Base

AsteRx-i3 D Pro+ delivers reliable centimeter level positioning combined with 3D orientation in demanding environments. Its onboard inertial sensor provides heading, pitch and roll angles and enables positional dead-reckoning, making it ideal for systems that require continuous positioning even during short GNSS outages. AsteRx-i3 D Pro+ is the most flexible GNSS/INS solution offering full access to raw GNSS and INS data and allowing multiple antenna configurations. 

Request your AsteRx-i3 D Pro+ demo

Get to know our GNSS+INS receiver OEM board

The AsteRx-i3 D Pro+ is not only delivering an already integrated position, but it also provides raw GNSS and IMU data, already synchronized and in a single data stream for customers that will integrate those components with other sensors for a larger data fusion system (i.e. lidar). Having GNSS and IMU hardware already integrated and data streams already synchronized enables users to focus on their own core technology without having to integrate GNSS and IMU sensors themselves.

Septentrio reliable centimeter-level positioning is based on true multi-frequency, multi-constellation GNSS (GPS, GLONASS, Galileo, BeiDou, QZSS) technology. AsteRx SBi3 Pro+ combines GPS/GNSS and an industry-grade IMU (Inertial Measurement Unit) to deliver precise positioning together with 3D attitude (heading, roll, pitch). Septentrio’s unique GNSS – IMU integration algorithm enables continuous positioning in environments of low satellite visibility where short GNSS outages are possible. This is referred to as coasting or dead reckoning and can happen near high structures, under bridges or under thick foliage. This makes AsteRx SBi3 Pro+ a robust positioning solution for machinery operating in environments challenging for GNSS, such as in container yards, urban canyons or near cliffs. 

Mechanical vibrations or shocks caused by rough terrain can wreak havoc with satellite tracking. LOCK+ automatically adjusts the parameters of this receiver so you never lose position. 

Activity in the ionosphere is a problem for GNSS signals, from loss of RTK fix to total loss of signal lock. Having honed our skills, supporting applications in the most iono-active areas on Earth,  the result is IONO+: the most advanced protection against ionospheric disturbances to GNSS signals on any receiver. 

Metal and large nearby structures can reflect GNSS signals and produce multipath. The APME+system effectively disentangles direct and reflected signals enhancing both position and measurement quality. APME+ is bias free and, in line with Septentrio’s commitment to maximum configurability, can be disabled. 

Advanced Receiver Autonomous Integrity Monitoring (RAIM+) comprises fault detection mechanisms of the receiver at all the levels including the generation of measurements, quality control and navigation algorithms. Detected faulty measurements, which are typically caused by high multipath or active ionosphere, are removed from the solution. 

AIM+ anti-jamming and RF spectrum monitoring system 

Image

AIM+ offers built-in protection against intentional and unintentional jamming using a sophisticated system of sampling and mitigation mechanisms. Your high-precision GNSS receiver can automatically suppress the widest variety of interferers from simple continuous narrow-band signals to the more complex wide band and pulsed transmitters as well as lnmarsat and Iridium satellite transmissions

Image

Septentrio-AsteRx-i-WebUI-screenshot
Illustrative image of an AsteRx-i OEM web user interface

This receiver includes an intuitive web user interface for easy operation and monitoring  allowing  you to control the receiver from any mobile device or computer. The web interface also uses easy-to-read quality indicators ideal to monitor the receiver operation during the job at hand. 

Request your AsteRx-i3 D Pro+ demo

GNSS technology

GPS: L1 C/A, L1C, L2C, L2P, L5
More info

„

GLONASS: L1 C/A, L2 C/A
More info

„

BeiDou: B1I, B2I, B3I
Galileo: E1, E5a, E5b, E5 AltBoc
QZSS: L1C/A, L2C, L5
SBAS: EGNOS, WAAS, GAGAN, MSAS, SDCM

Septentrio’s patented GNSS+ technologies

AIM+ anti-jamming, anti-spoofing Advanced Interference Monitoring and Mitigation
More info

AIM+

Unique anti-interference system monitors, flags and mitigates narrow and wideband interference, jamming and spoofing.

More info
FUSE+ : fusion of RTK positioning with an inertial sensor and more
More info

FUSE+

Sensor fusion for improved availability in any environment condition.

More info

Interfaces

Hi-speed serial ports (LVTTL)
4
Ethernet port (TCP/IP, UDP, LAN 10/100 Mbps)
More info
1
xPPS output (max 100Hz)
1
USB device port (TCP/IP communication and with 2 extra serial ports)
1
Event markers
2

Integrated position accuracy

Standalone - horizontal
More info

Open-sky conditions. RMS levels.

1.2 m
Standalone - vertical
1.9 m
SBAS - horizontal
0.6 m
SBAS - vertical
0.8 m

Product datasheets

Support documentation

AsteRx-i3 Product Group Hardware Manual v1.0.0
2.56 MB
Download

Log in below and download our product resources

By filling in this form, you agree to the processing of your personal data by Septentrio in accordance with our privacy policy for the purpose of providing you with the requested information and keeping you informed via e-mail of relevant webinars, invitations to events and exhibitions, the latest product technology and insight articles about the GPS/GNSS industry and technology. If you change your mind, you can unsubscribe at any time.