(You will need the Adobe Acrobat Reader to view some documents on this page.)

<< Back to GPS receivers overview

PolaRx2e_SBAS Single-Frequency receiver

The PolaRx2e_SBAS receiver can track the  L1 signals from up to 6 SBAS augmentation satellites such as EGNOS and WAAS. This offers your application vital integrity information, increasing the confidence in the positioning solution and allowing application in safety-critical environments. The receiver may also be used either as base station or as rover receiver for differential GPS and RTK. When the SBAS option is installed on the single-antenna version of the PolaRx2e, it will track SBAS satellites by default and will use the SBAS corrections in the optimal way.  For the multi-antenna version, SBAS has to be configured manually.

PolaRx2e_SBAS variants:

• PolaRx2e_SBAS_OEM :
  Single-Frequency GPS/SBAS Receiver Board
  Software upgradeable to dual-frequency operation
• PolaRx2e_SBAS :
  Single-Frequency GPS/SBAS Receiver
• PolaRx2eSF_OEM:
  Single-Frequency multi-antenna GPS/SBAS Receiver board
  Software upgradeable to dual-frequency operation
• PolaRx2e@_SF:
  Single-Frequency multi-antenna GPS/SBAS Receiver
  Software upgradeable to dual-frequency operation

Receiver options:

• PLRX_BASE:
  RTK Base corrections option
• PLRX_RTK:
  RTK option (base/rover) (incl. DGPS)
• PLRX_Event:
  Event Marker option (2 marker inputs)
• PLRX_ETH:
  Ethernet option (incl. Crossed Ethernet cable)
• PLRX_LOG:
  Logging option (incl. 256 MB non-removable PCMCIA card and PLRX_ETH)

download PolaRx2e datasheet